2-1/16" 10000psi FC Gate Valve

• Customization: Available
• Type: Direct-Acting
• Connection Form: Flange
• Model NO.: YFC-52-70
• Actuator: Manual
• Seal Surface: Parallel Gate Valve
• Thread Position of Valve Rod: Outside Gate Valve
• Usage: Regulation
• Application: Industrial Usage
• Pressure: 2000psi-15000psi
• Media: Include in All Above
• Temperature: Include in All Above
• Standard: API 6A
• Material: AA-Hh
• Transport Package: Plywood Package
• Specification: 2-1/16"
• Trademark: YOUYAO
• Origin: China
• HS Code: 8481804090
• Production Capacity: 1000 Sets Per Month

Product Description

CAMERON FC GATE VALVE 
Full bore design, effectively eliminate the pressure drop and eddy, slowing down fluid solid particles on the flushing valve;
·A unique seal form, so that substantially reduce the torque;
·metal seal between the valve body and the valve cover, valve plate and valve seat;
·The valve plate surface of supersonic spray coating carbide, valve seat ring adopts hard alloy, with good wear resistance, corrosion resistance;
·Seat ring mounted by a fixed plate, keeping good floatability;
·The valve stem is provided with inverted sealing structure, convenient for replacement of valve stem packing under pressure case;
·The valve cover is equipped with sealing grease injection valve, in order to supplement the sealing grease, enhance sealing performance of valve seat and valve plate and lubricating performance;
·configure the gas ( liquid ) actuating drive according to the needs of the user.
• Working Pressure: 2000PSI~20000PSI
• Nominal Bore: 1.13/16"~9" (46mm~230mm)
• Working Medium: oil,natural gas,mud and gas containing H2S,CO2
•  Working Temperature: -46°C~121°C(Class LU) • Material Class: AA,BB,CC,DD,EE,FF,HH
• Specification level: PSL1-4
• Performance Requirement: PR1-2

PARTS LIST
Item	Description	Qty	Material
1	Body	1	4130
*2	Seat	2	4130+HF
*3	Seat Seal Ring	4	NBR
*4	Wave Spring	2	410
*5	Gate	1	4130+HF
*6	Stem Screw	1	Steel
*7	Stem	1	410
*8	Bonnet Seal Ring	1	Steel
9	Bonnet	1	4130
*10	Grease Screw	1	Assy.
11	Bonnet Stud	8	4140
12	Bonnet Nut	8	5140
*13	Stem Seal Assy.	1	Assy.
14	Packing Gland	1	Steel
*15	Bearing	2	Assy.
16	Bearing Bushing	1	Steel
*17	Sec. Seal	1	NBR
18	Screw Housing	1	Steel
19	Lock Screw	1	Steel
*20	Lube Fitting	1	Assy.
21	Hub Assy.	1	Steel
22	Washer	1	Steel
23	Lock Nut	1	Steel

Major Repair------─ One Each For One Year's Service
Assembly Drawing For SLAB GATE VALVE(NON-RISING STEM) 5000psi Flanged Ends(PDF)
Assembly Drawing For SLAB GATE VALVE(NON-RISING STEM) 5000psi Threaded Ends(PDF)
Assembly Drawing For SLAB GATE VALVE(NON-RISING STEM) 10000psi Flanged Ends(PDF)
SLAB GATE VALVE (RISING STEM)
The rising stem slab gate valves manufactured by Jianhu County OTL Valve Factory. are available in temperature classes L, P, R, S, T, and U specified in API 6A. Gate valves to be used in the 350ºF or 650ºF high temperature can be supplied on request. Gate valves manufactured by our company are available in 3000psi, 5000psi and 10000psi working pressure, nominal size from 1-13/16" through 4-1/16",material classes from AA through FF, product specification levels (PSL) from 1 through 3 and performance requirement (PR) 1.
The rising stem slab gate valves manufactured by our company have the same characters as the non-rising stem slab gate valves. For it is designed by rising stem, the close and open of the valves is completely controlled .
SPECIFICATION:
Manufactured and Tested in Accordance with API Spec 6A
Simple structure and renewable gate and seat assembly.
One-piece and double-acting gate with long service life.
Both thrust bearings with large load capacity and composite rubber-plastic stem lip packing minimize operational torque.
Bearing cap is provided with a grease cup to make it easy to inject lubricating grease in the field.
Threaded packing gland allows removal of bearings and stem packing under line pressure.
Both the bolted bonnet and modern bonnet seal ring provide simple structure and reliable sealing.
The sealing surfaces of the gate and seat are hardfaced for wear and corrosion resistance.
Wave springs are installed between the body and seat and between the gate and seat. The gate and seat still maintain a positive metal to metal seal under low pressure.
Floating gate design requests the hand wheel to be backed off 1/4 turn after its rotation can go no further.
Note:
Under pressure, the valve is forbidden to be semi-shrouded, for it will do great harm to the gate valve and great reduce the service life of the valve.





Pls kindly find the following our valves and parts in stock or under production now:
CAMERON FC EE-0.5, PSL3G, PR1 valves
1-13/16 10000psi  (65pcs)
2-1/16  10000PSI  (70pcs)
2-1/16  15000PSI  (50pcs)
2-9/16  10000PSI  (55pcs)
3-1/16  10000PSI  (60pcs)
4-1/16  10000PSI  (160pcs)
4-1/16  15000PSI  (40pcs)
5-1/8   100000psi  (20pcs)
7-1/16  100000psi  (20pcs)

CAMERON FC Pneumatic VALVE EE-0.5,PSL3G,PR1 
2-1/16  5000PSI  (15pcs)
2-1/16  10000PSI  (15pcs)
3-1/16  10000PSI  (5pcs)

CAMERON FC HY VALVE EE,PSL3G,PR1  
2-1/16  15000PSI  (25pcs)
3-1/16  15000PSI  (20pcs)
 
CAMERON FLS VALVE,EE,PSL3G,PR1
7-1/16 10000PSI BALL SCREW FLS VALVE (25pcs)

410SS+supersonic tungsten caribde gates and seats: 
1-13/16" 10000PSI              445sets
2-1/16" 10000PSI, 15000PSI     400sets
2-9/16" 10000PSI, 15000PSI     350sets
3-1/16" 10000PSI               400sets 
3-1/16" 15000PSI               1900sets
4-1/16" 10000PSI               500sets
4-1/16" 15000PSI               350sets
5-1/8" 10000PSI                300sets
7-1/16" 10000PSI               300sets
CAMERON WKM  2-1/16"   5000PSI    380 SET  
3-1/8"    5000PSI    50 sets     
4-1/16"  5000psi     40 sets   
7-1/16"  10000PSI     40 sets
Our products range is very wide including all models of high pressure valves, BOPS, unions, swivel joints and etc, for any need of the above, just let me know freely,
 believe that our delivery should be the quickst in Asia, any of your inquiry is welcome, wish you all the best and have a nice day.