API 6A Kill Manifold
Product Description
1. Application
"In case of increase of the well head pressure,
The kill manifold can provide a means of pumping heavy drilling fluid into the well to balance bottom hole pressure so that well kick and blowout can be prevented. In this case, the increasing well head pressure also can be released directly through blowdown lines connected to the kill manifold so as to release bottom hole pressure, or the water and extinguishing agent can be injected into the well using the kill manifold. The check valves on the kill manifold only allow injection of kill fluid or other fluids into the well bore through themselves, but do not allow any backflow so as to perform the kill operation or other operations. "
| 2. Configuration |
|
|
|
|
|
|
|
| The kill manifold consists of check valves, gate vales, pressure gauges and line pipes. The one end of the kill manifold is connected to the drilling spool and the other end is connected to the pump. The kill manifold and choke manifold are both designed to API 16C and can be used together. The kill manifold is available in pressure ratings of 14MPa, 21MPa, 35MPa and 70MPa. |
| 3. Operating Instructions |
|
|
|
|
|
|
(1) The working pressure of all line pipes, gate valves and check valves shall be compatible with that of the BOP stack used.
(2) The kill manifold is not intended to be used as common lines for pouring drilling fluid. |
| |
|
Parts List: |
|
|
|
|
|
|
| |
|
Item |
Component |
Qty |
Material |
|
|
|
| |
|
1 |
Skid Base |
1 |
|
|
|
|
| |
|
2 |
Union Flange |
2 |
4130 |
|
|
|
| |
|
3 |
Check Valve |
2 |
|
|
|
|
| |
|
4 |
Blind Flange |
2 |
4130 |
|
|
|
| |
|
5 |
Gate Valve |
2 |
|
|
|
|
| |
|
6 |
Gate Valve |
2 |
|
|
|
|
| |
|
7 |
Gate Valve |
1 |
|
|
|
|
| |
|
8 |
Pressure Gauge |
1 |
|
|
|
|
| |
|
9 |
Needle Valve |
1 |
|
|
|
|
| |
|
10 |
Companion Flange |
1 |
4130 |
|
|
|
| |
|
11 |
Five-way Piece |
1 |
4130 |
|
|
|
we have got API approved with our license number 6A-1227, 16C-0174, so plz find the following our valves and parts in stock or under production now:
CAMERON FC EE, PSL3, PR1 valves
1-13/16 10000psi (40pcs)
2-1/16 10000PSI (900pcs)
2-1/16 15000PSI (55pcs)
2-9/16 10000PSI (60pcs)
3-1/16 10000PSI (60pcs)
4-1/16 10000PSI (100pcs)
4-1/16 15000PSI (50pcs)
5-1/8 100000psi (55pcs)
7-1/16 100000psi (44pcs)
CAMERON FC Pneumatic VALVE EE,PSL3,PR1
2-1/16 5000PSI (10pcs)
2-1/16 10000PSI (20pcs)
3-1/16 10000PSI (10pcs)
CAMERON FC HY VALVE EE,PSL3,PR1
2-1/16 15000PSI (30pcs)
3-1/16 15000PSI (20pcs)
CAMERON FLS VALVE,EE,PSL3,PR1
7-1/16 10000PSI BALL SCREW FLS VALVE (10pcs)
410SS+supersonic tungsten caribde gates and seats:
1-13/16" 10000PSI 450sets
2-1/16" 10000PSI, 15000PSI 300sets
2-9/16" 10000PSI, 15000PSI 200sets
3-1/16" 10000PSI 400sets
3-1/16" 15000PSI 100sets
4-1/16" 10000PSI 300sets
4-1/16" 15000PSI 200sets
5-1/8" 10000PSI 350sets
7-1/16" 10000PSI 300sets
CAMERON WKM
2-1/16" 5000PSI 300SET
3-1/8" 5000PSI 50 sets
4-1/16" 5000psi 50sets
7-1/16" 20sets
CAMERON DEMCO
2" 5000PSI 40 sets
3" 5000psi 40sets
4" 5000psi 30sets
5" 5000psi 50sets
DEMCO 2" 7500PSI 20 sets
3" 7500psi 15sets
4" 7500psi 20 sets
5" 7500psi 30 sets
UNIONS
FIG206 2" 150, 3" 100, 4" 300PCS
FIG602,1502 2" 100, 3" 150, 4" 100PCS under production
Also type of BOPS including models as following, total quantity 50sets:
21-1/4" 2k annular
Double-ram 21 1/4" 3K
annular 13 5/8" 5K
Double-ram 13 5/8" 10K
Single-ram 13 5/8" 10K
Annular-11" 10K
D-Ram 11" 15K
S-ram 11" 15K
Annular-9" 10K
D-Ram 11" 15K
S-ram 9" 15K
D-Ram 9" 15K
Annular-7" 10K
D-Ram 7" 15K
S-ram 7 " 15K
Annular - 7 " 5K
D-Ram 7" 10K
S-ram 7 " 10K
D-Ram 7" 5K
S-ram 7 " 5K
XQ140-12YA 15pcs
XQ140-12YT 6pcs
TQ340/35 7pcs
ZQ127-25Y 15pcs
XQ114-6YB 13pcs
XQ89/3YB 11pcs
HYDRAULIC POWER TONG, MODEL YD160, 3 SETS
As you can see that our production range is very wide, for any need or inquiry of the above, just contact with me freely, looking forward to start our cooperation through our mutual efforts and your further reply would be highly appreciated.
){kind=link}